Industry News

Location:Home--News--Industry News

The Advantages Of Stainless Steel Pipe Fittings

Date:2012-7-31 16:05:56

For the steel pipe to withstand fluid pressure test should be conducted to test the pressure of hydraulic capacity and quality, the provision does not leak under pressure, wet or expansion of qualified, some steel but also according to the requirements of the standard or demand side, curling test , flaring test, flattening tests.

1) stainless steel pipe fittings mechanical properties, tensile strength is 2 times the pipe, copper tube of 2.5 times, is nearly 20 times the plastic tube. Strength of the material determines whether the strong water crashworthiness, safety and reliability. The safe and reliable water in construction to the most important requirements. In the case of being blunt, stainless steel pipe fittings leaking highly unlikely, but copper and plastic pipes relatively high leakage rate, pipeline construction or re-decoration easily damaged. Several major cities in the domestic residence on the main complaint is the plastic water pipe leak, a major cause of leaks in plastic pipes stand up to physical shock.

Auto voltmeter indicating the vehicle electrical system voltage, the road also can accurately determine the power generator and battery charge situation; when using an electrical switch when the voltage meter has to reflect, that can be used to judge electrical equipment works properly. Automobile non-contact tachometer, you can more accurately measure the real-time engine speed, driving instructed the engine speed, engine speed time to time direct gear changes, with the engine tachometer, engine can be some glitches from the tachometer reflected.

2) stainless steel pipe fittings corrosion resistance. Stainless steel in the air very easily lead to 2-3% mm oxide film, a very good resistance to corrosion, the stainless steel pipe fittings can be as 30m / s impact velocity, can resist corrosion caused by water vortex, according to different fluid, you can choose different brands of tubes.

304 stainless steel pipe fittings steel tensile strength is 2 times that of copper tube 3 to 4 times, plastic pipe 8 to 10 times. Strength of the material determines whether the strong water crashworthiness, safety and reliability. The safe and reliable water in construction to the most important requirements. In the case of being blunt, stainless steel pipe leakage is very unlikely, while the copper and plastic pipes relatively high leakage rate, pipeline construction or re-decoration easily damaged. Several major cities in the domestic residence on the main complaint is the plastic water pipe leak, a major cause of leaks in plastic pipes stand up to physical shock.

3) stainless steel pipe fittings physical properties. That is, the heat shrink up. stainless steel pipe fittings of various pipe thermal expansion coefficient is the lowest, about 0.59 times the brass.

For difficult faults, can replace the parts of many. Note the use of diagnostic methods as launch x431. For example, the lack of engine power failure, can replace a new air filter, and then re-test; for the oil system fault, if you suspect the oil pump pressure is low, you can replace a new fuel pumps. The brake system failure, the more difficult to identify the case, you can try to change a brake master cylinder (master cylinder), after the system re-adjusted the brake system failure on the excluded. For the power steering system failure, if it is turned heavy, you can try to change a power steering device, the system re-commissioning after the power steering system failure on the excluded. So the above example, you can explain failure to occur in office replacement parts. Put on the replacement parts for assembly, you can not remove here, so even eliminating the need for maintenance procedures are also the double benefit of something.

4) stainless steel pipe fittings look beautiful. Long-term stay bright, do not pollute the clear tube wall, helping improve the buildings grade.

< Back

Copyright© 2012-2014   Linyi Sanwei Precision Casting Co., Ltd. All Rights Reserved.
Address: Crossing of Xinhua and Ehuang Road, Luozhuang Hi-tech Development  Zone, Linyi, China
Tel:0086-539-8987871  Fax:0086-539-8987872  E-mail:info@sanwei-casting.com
You are the visitors
Miss Du
Mr Guo